Car Exterior Door Handle Assembly

An interior handle and an exterior handle have totally different needs. The car exterior door handle assembly must resist water, dust, UV rays, and even tampering. Our product meets all these challenges.

The outside handle is directly exposed to sun, rain, and wind. If the material is poor, it will turn white, become brittle, and crack in three years. We choose PC/ABS or PA6+GF30 for the product. PC/ABS has good weather resistance. PA6+GF30 is stronger. We recommend the first for appearance parts and the second for structural parts.

Another hard point for the product is the feel. The force to pull the door open must be just right. Too light, and it feels like it will break. Too heavy, and it is hard to open. We adjust the feel through springs and dampers. We have special test equipment for the car exterior door handle assembly.

Every batch is sampled for pull force. We have supplied this product to General Motors, Hyundai, BYD, and Geely. Our factory is 34 years old, covers 5,000 square meters, and has 80 workers. We run over 60 injection machines. Monthly capacity is 3 million shots.

We have IATF16949. During production, we do first-piece inspection and patrol inspection. For appearance parts like the product, we use vision machines to check for sink marks, flash, and flow lines. You can also send a third party to inspect. For custom work, you send the drawing. We give samples in 50 days.

Our R&D team has more than 20 people. They can do mold flow analysis for the car exterior door handle assembly. They check if the filling is good and if there is trapped gas. After-sales is handled by one person. Damaged goods are replaced by actual count. Warranty depends on the product. Minimum order is 10,000 pieces, and colors can be mixed. Payment is 100% in advance. We accept many currencies. Bulk orders get discounts. Trade terms are EXW or FOB. You are welcome to visit our factory in Yuyao.