Product Overview
Custom-engineered plastic gears designed for low-noise power transmission, self-lubricating operation, and weight reduction in industrial equipment. Engineered for OEMs requiring precision components that replace traditional metal gears without sacrificing load capacity.
Target Buyers: Mechanical Engineers, Equipment OEMs, and Procurement Managers in Europe and North America.
Core Function: Transmit torque and rotational motion between shafts with reduced operational noise, zero lubrication requirements, and corrosion resistance.
-
Plastic Gear ShaftA Plastic Gear Shaft combines a molded gear section and a rotating shaft in one component. Typical uses include window lift motors, seat adjusters, door locks, HVAC actuators, and small gearboxes....
-
Plastic Gear AxleAs a 34-year veteran in the automotive plastic injection industry, we understand that even the smallest component determines the driving experience. Our Plastic gear axle is a core product...
-
Plastic Ratchet WheelThe Plastic ratchet wheel is an essential component for unidirectional movement in automotive locking and transmission mechanisms. In our 34 years of manufacturing, we have mastered the art of...
-
Plastic Deceleration GearReducing speed while amplifying torque is a delicate balance, and our Plastic deceleration gear is engineered specifically for this purpose. We utilize a combination of PA6 and POM to provide the...
-
Dual-Layer Plastic GearThe Dual-layer plastic gear is the ultimate space-saving solution for complex automotive micro-motors. By integrating two gears into a single injection-molded part, we enable simultaneous...
-
Plastic Engine Timing GearSynchronization is critical in automotive systems, and our Plastic engine timing gear is designed to provide exact motion control for engine-adjacent motors and actuators. We utilize...
-
Miniature Plastic Gear WheelsSmall components often face the biggest challenges, which is why our Miniature plastic gear wheels are engineered for precision and low-noise operation. These gears are the heartbeat of modern car...
-
Plastic Ratchet GearA Plastic Ratchet Gear works with a pawl to produce indexed movement or one-direction rotation. It is commonly used in automotive lock actuators, seat mechanisms, adjustment controls, and compact...
-
Plastic Reduction GearA Plastic Reduction Gear forms part of a gear train that reduces motor speed and increases output torque. It is used in window lifts, wiper motors, seat adjusters, HVAC flap actuators, and other...
-
Plastic Double GearA Plastic Double Gear has two coaxial gear sections molded as one compound part. It connects two stages of a compact gearbox while keeping a fixed speed ratio and angular relationship between the...
-
Plastic Timing GearsPlastic Timing Gears are direct-meshing gears that maintain a defined angular relationship between two shafts; they are not toothed-belt pulleys. They are used in small motor timing systems,...
-
Plastic Helical GearA Plastic Helical Gear uses angled teeth to transmit motion between parallel shafts with progressive engagement. It is used in mirror motors, window drives, seat mechanisms, HVAC actuators, and...
Product Types & Configurations
Spur Gears
Parallel shaft transmission; high mechanical efficiency for standard industrial gearboxes and automation drives.
01
Helical Gears
Angled tooth trace; smoother engagement and higher load distribution, minimizing vibration at higher operating speeds.
02
Bevel Gears
Intersecting shaft transmission (typically 90 degrees); utilized in compact drive assemblies and hand-tool mechanisms.
03
Worm Gears
High reduction ratios in a compact space; suitable for lifting mechanisms and locking drives where back-driving must be prevented.
04
Rack and Pinion
Converts rotational motion to linear travel; deployed in CNC axes, automated sliding doors, and gantry systems.
05

Parameter / Feature: Specification Details
Available Materials: POM (Acetal/Delrin), PA66 (Nylon, unfilled or glass-filled), PEEK, UHMW-PE, Polycarbonate (PC)
Module Range: Mod 0.5 to Mod 8.0 (DP 48 to DP 3)
Max Outer Diameter: Up to 600 mm (Machined); Up to 350 mm (Molded)
Pressure Angle: Standard 20° (custom angles 14.5°, 25° available upon request)
Dimensional Tolerance: Machining: Up to ±0.01 mm; Molding: DIN 3962 Class 7 to 9
Operating Temperature: -40°C to +120°C (Material dependent; PEEK up to +250°C)
Lubrication: Dry running capable; compatible with synthetic greases and oils
Applications & Operating Conditions
Target Industries
Material handling systems, food processing equipment, medical diagnostic devices, office automation, textile machinery, and automated guided vehicles (AGVs).
Typical Equipment
Conveyor drive units, pump valve actuators, sorting mechanisms, precision positioning tables, and automatic dispensing units.
Operating Environment
Suitable for moisture-dense, corrosive, or clean-room environments where metal-on-metal lubrication is prohibited or prone to contamination.
Customization & OEM/ODM Capabilities
Manufacturing Routes
CNC hobbing, milling, and turning for low-volume prototypes and tight-tolerance custom parts; precision injection molding for medium-to-high volume production runs.
01
Material Selection Support
Engineering evaluation based on load requirements, rotational speed, ambient temperature, and chemical exposure.
02
Design Modification
Root fillet optimization, pressure angle adjustments, and weight-reduction pocketing based on FEA (Finite Element Analysis) feedback.
03
Tooling Development
In-house mold flow analysis, multi-cavity mold fabrication, and hardened steel insert tooling to optimize gate location, prevent warping, and ensure part geometry consistency.
04
Quality Assurance: Manufactured under ISO 9001 certified quality management systems ensuring consistent process control across all production batches.
Machining Infrastructure: CNC 5-axis machining centers and high-speed gear hobbing machines maintaining stable cutting feeds.
Metrology & Inspection:
CMM (Coordinate Measuring Machine) for 3D profile and bore tolerance verification.
Gear rolling testers for runout, tooth thickness, and mesh clearance checks.
Projectors and surface roughness testers.
Traceability: Raw material batch certificates (RoHS, REACH, and FDA-compliant food-grade documentation available) linked directly to outgoing shipment inspection reports (COA).

Ordering & Commercial Terms
Minimum Order Quantity (MOQ):
Machined prototypes / small batches: 50 pieces per item.
Injection molded production: 1,000 to 5,000 pieces (subject to module and mold investment).
Prototyping Lead Time: 7 to 12 working days for CNC machined samples from 2D/3D CAD files (STEP, IGES, SolidWorks, PDF).
Production Lead Time: 15 to 25 days for standard volume orders after drawing and sample approval.
Shipping Documentation: Commercial Invoice, Packing List, Material Data Sheet (MDS), and Inspection Report supplied with every batch.

Request a Quote
To receive an accurate technical proposal and quotation within 24 hours, please provide the following parameters:
2D & 3D Drawings: Module, number of teeth, face width, bore size, and keyway dimensions.
Operating Conditions: Expected torque/load, rotational speed (RPM), operating temperature, and mating gear material.
Material Preference: Specific polymer grade or functional requirements (E.g., wear-resistant, anti-static, food-grade).
Quantity: Prototype quantity and annual estimated volume.
With abundant experience, we are one of the most professional plastic gear manufacturers and suppliers in China. We warmly welcome you to wholesale customized plastic gear from our factory. If you have any enquiry about quotation, please feel free to email us.
plastic gear, Plastic Ratchet Gear, Small Plastic Gear Wheels