Product Overview
Plastic socket panels are molded PA6 or ABS faceplates for wall sockets, switch modules, power outlets, and equipment connection panels, forming the visible cover around the electrical mechanism while positioning the socket opening, switch aperture, mounting holes, and internal plastic interfaces.
Core Advantages
Mounting-Face Flatness Within 0.3 mm
Flatness across the wall-contact surface is controlled to 0.3 mm or less. Once fastened, the cover sits evenly against the wall or equipment panel without raised corners or visible rocking.
UL 94 V0 or V2 Material Options
PA6 or ABS can be supplied in UL 94 V0 or V2 flame-retardant grades. If abnormal heating occurs around the electrical mechanism, the selected resin limits flame propagation to the agreed material level.
86-Type, 118-Type, and Custom Alignment
Socket apertures, switch windows, and screw holes share common datums for 86-type, 118-type, or proprietary layouts. This keeps the electrical module aligned with the visible face without forced assembly or uneven gaps around it.
Product Parameters
|
Parameter |
Value |
|
Material |
PA6 or ABS |
|
Flame retardant level |
V0 or V2 (UL94) |
|
Flatness |
≤0.3mm |
|
Size type |
86 type / 118 type / Custom |
|
Surface finish |
Glossy / Matte / Brushed texture |
Customization
Available options include 86-type, 118-type or proprietary outer dimensions, socket and switch openings, mounting-hole positions, snap interfaces, PA6 or ABS material, V0 or V2 grade, glossy, matte or brushed texture, and white, gray, black or custom color.
Quality Control
Incoming flame-retardant resin is identified by grade and lot before molding. A wall-fit fixture checks panel flatness, aperture position, and mounting-hole alignment, and the approved socket module is used to confirm assembly fit. Specified V0 or V2 lots follow vertical-burn verification. Visible faces are inspected for sink marks, flow lines, scratches, and color variation.
FAQ
Q: Can a sample be supplied before production?
A: Yes. A molded sample is supplied to confirm module fit, wall appearance, color, texture, and mounting-hole position before production.
Q: How are socket panels packed?
A: Panels are separated in inner bags or trays and packed in export cartons. Glossy faces can use protective film or individual sleeves to prevent scratches.
Q: Are copper contacts and electrical mechanisms included?
A: The standard product is the molded plastic panel only. Contacts, terminals, shutters, springs, and complete electrical mechanisms are included only under a separate assembly specification.
Q: Does every socket panel automatically meet V0?
A: No. V0 applies only when the specified V0 resin grade is used and the project inspection plan confirms that requirement. Standard and V2 grades must not be presented as V0 products.
Hot Tags: plastic socket panel, China plastic socket panel manufacturers, suppliers, factory, Plastic Socket Panel, Plastic Strap Handles, Acrylic Plastic Keychain, Plastic Remote Control Housing, Injection Molded Housing, Plastic Pump Dispenser
